Radio communications tower and equipment shelter on a forested ridge at dusk

Portland Metro P25 Cutover: WCN Network Retires 800 MHz (2026)

Portland metro first responders have cut over to the WCN Network, a Project 25 Phase II digital system, and the old Washington County / Clackamas County / Newberg 800 MHz system is retired. The marker is the RadioReference county entry for Washington County, Oregon, which now carries a banner stating the switch is complete; that page was last updated Nov. 9, 2026.

The practical result: a scanner that worked in Portland last month may now be deaf to fire and law traffic, and it is not a settings problem. It is a system change.

What changed

RadioReference's Washington County page states that Washington and Clackamas County first responders "have switched to a new P25 phase II digital radio system," the WCN Network, and that the new system "has replaced the Washington County / Clackamas County / Newberg 800mhz system."

The WCN system entry lists Project 25 Phase II, SysID 9AA, with sites including South Saddle Mountain, Goat Mountain, Sawtell, and the Clackamas simulcasts.

The retired system was a Motorola Type II 800 MHz network. Type II is a different trunking format, and Phase II is a different voice format on top of it. A radio built for the old system will not follow the new control channel.

How big this system is

WCCCA says the network serves more than 1 million people across 2,700 square miles. It links four dispatch centers: WCCCA, CCOM, LOCOM, and NEWCOM. It runs 48 radio sites and carries more than 7,400 WCN radios, according to WCCCA radio services.

That scale is why the cutover matters beyond hobbyists. Four dispatch centers, one radio system, one encryption policy decision at a time.

What you can still hear

Coverage is mixed, and the RadioReference entry is the clearest source. Several law talkgroups are flagged full encryption, including Newberg-Dundee Police A and B. Fire and EMS dispatch groups are listed in the clear.

Clear does not mean analog. Those groups ride the same P25 Phase II system, so hearing them needs a receiver that decodes P25 Phase II. An analog handheld or a Type II only trunking scanner will not produce usable audio from them.

If you are shopping for a digital receiver, our writeup on the Uniden SDS150 and simulcast handling covers the issue that bites Portland listeners hardest. Simulcast sites put the same signal on several towers at slightly different times, and older digital scanners choke on that overlap.

The streaming feed is offline too

The free option also took a hit. WCCCA's page and its radio streams page now say "We are working to restore Broadcastify services after a recent upgrade." The metro's stream is down while the system is rebuilt.

That is the second squeeze. Broadcastify now requires an account to listen, and in Portland the feed is offline on top of that.

How this compares to southern Oregon

Portland is not the first Oregon metro to make this move. Jackson County's P25 cutover left analog scanners dark in the Medford area. The pattern is statewide: digital trunking replaces legacy 800 MHz, and analog hardware stops producing audio.

What to check if your scanner went quiet

  1. Confirm the system. If you are in Washington, Clackamas, or Newberg, you are on WCN. No amount of antenna work brings back a retired control channel.
  2. Check the talkgroup list. Look for an encryption flag on your talkgroup before you spend money on hardware. An encrypted group stays silent on any consumer receiver.
  3. Check P25 Phase II support. Your scanner must support Phase II and, for simulcast areas, simulcast-tolerant design.
  4. Re-check your programming. New system, new site frequencies, new talkgroup IDs. Old programming cannot follow the new sites.

Uncertainty worth flagging

No WCCCA or county press release with a go-live date was found. The WCN system page still carries older text saying the cutover would happen "in the future." The Nov. 9, 2026 RadioReference database update is the strongest available marker that the switch is recorded as complete.

Hear your county’s traffic — tonight

Every scanner ships pre-programmed to your zip code. Open the box, turn it on, listen.

Shop Scanners →

FAQ

Is Portland police radio encrypted now?

Partly. The RadioReference entry flags several law talkgroups as full encryption, including Newberg-Dundee Police A and B, while fire and EMS dispatch groups are listed in the clear.

Why did my analog scanner stop working in Portland?

The Washington County / Clackamas County / Newberg 800 MHz system was replaced by the P25 Phase II WCN Network. Analog and Type II only radios cannot follow the new system.

What is WCN SysID 9AA?

It is the system identifier for the WCN Network, a Project 25 Phase II system with sites at South Saddle Mountain, Goat Mountain, Sawtell, and the Clackamas simulcasts.

Can I still listen to Portland fire and EMS?

Fire and EMS dispatch groups are listed in the clear, so a P25 Phase II capable receiver can hear them. Simulcast distortion is the main technical hurdle.

Is the Portland Broadcastify feed coming back?

WCCCA says it is "working to restore Broadcastify services after a recent upgrade" and gives no date.

How many agencies use the WCN Network?

WCCCA reports four linked dispatch centers (WCCCA, CCOM, LOCOM, NEWCOM), 48 radio sites, over 7,400 radios, and coverage of more than 1 million people across 2,700 square miles.

Bottom line: Portland metro moved to P25 Phase II on the WCN Network and retired the old 800 MHz system. Analog and Type II only scanners are now silent there, the metro stream is offline, and several law talkgroups are fully encrypted. Fire and EMS dispatch remain in the clear for listeners with Phase II hardware.

Listen to your county tonight

Your scanner, pre-programmed to your zip code

Open the box, turn it on, listen. Your county’s frequencies are already loaded, tested, and backed by lifetime support.

  • ✓ Free US shipping
  • ✓ Programmed to your ZIP
  • ✓ Lifetime support
  • ✓ 30-day returns
Back to blog